Providing marine products for more than 40 years

Bow and Stern Eyes Banner

Salt Spray Test

Page Two

Summary

The results from the Salt Spray Environmental Exposure Testing performed on the various parts submitted in two (2) batches to Edglo Laboratories May 11 and July 23, 2003 respectively are contained in the following pages. The testing was performed according to ASTM B117-90 specifications using a 5% by weight solution of Sodium Chloride at a temperature of 95 degrees Fahrenheit. The Salt Solution is applied at a rate to meet the collection requirements of 1 - 2 mls/hr/80cm2.

The samples were submitted using the following product descriptions:

  1. May 11, 2003 , 316 Stainless Steel, Various Part Descriptions, Natural, Hand Polish and KF Finishes.

  2. May 11, 2003 , 304 Stainless Steel, Various Part Descriptions, Natural, Hand Polish and KF Finishes.

  3. May 11, 2003 , 304 Stainless Steel, Various Part Descriptions, All KF Finishes.

  4. July 23, 2003 , 316 Stainless Steel, Various Part Descriptions, Natural Finish.

  5. July 23, 2003 , 316 Stainless Steel, Various Part Descriptions, Electropolished.

  6. July 23, 2003 , 304 Stainless Steel, Various Part Descriptions, Natural.

  7. July 23, 2003 , 304 Stainless Steel, Various Part Descriptions, Electropolished.