EPCO Marine Products
EPCO Products, Inc.

Mooring Eyes

  • 304 and 316 stainless steel
  • Stainless steel exterior adjusting nuts & stainless or zinc plated interior nuts in either standard or lock nuts
  • Available in 3/8" thread sizes with rolled threads. 1/2" thread sizes by special request.
  • Thread lengths range from 2-1/2" to 4-1/2" & longer if needed
  • Standard Bow Eye dimensions between legs
  • Electro-Polished, Ultra Sheen Polish or Natural finish
  • Made in the U.S.A.
Model 132 Series 3/8" X 2-1/2" threads X 3-1/2" OAL
Model 1316 Series 3/8" X 2-1/2" threads X 4-1/2" OAL
Model 1309 Series    3/8" X 3-1/2" threads X 6-1/2" OAL
Standard bend is 45 degrees—upper portion length varies
Custom models & shapes available—quoted upon request
Build a Bow/Stern or Mooring Eye (PDF)

 

Cleated Mooring Eyes

  • 304 stainless steel
  • Same basic features & variations as Mooring Eyes noted above
  • Made in the U.S.A.
Model 900 Series    formed cleat style—1/8" thick X 3/4" wide X 6" long fits all standard EPCO 3/8" Bow & Mooring Eyes
Electro-Polished, Ultra Sheen Polish or Natural finish

 

Build a Bow/Stern or Mooring Eye

EPCO maintains an extensive and ever increasing list of more than 800 SKUs of existing bow/stern eyes and their components. The list was developed over more than 40 years of building bow and stern eyes to customer design or manufacturing requirements. This list is made up of different bow/stern eye material diameters, stainless steel material grades (304 and 316), over all lengths (OAL), thread lengths, plate styles & sizes, hardware, washers, metal finishes, coatings, packaging, shapes, etc.

The Bow/Stern or Mooring Eye Design Form (PDF) makes it possible to design a bow/stern or mooring eye that is not on EPCO's product list to fit the application or to learn if it is already available.

Helpful design information is available on the Bow & Stern Eyes,Tensile Test Report, Salt Spray Test Report, and Warranty pages on this site. Matching plate and hardware items are listed on the Bow & Stern Eyes page.

Print out the form (PDF), supply required information and fax to EPCO at 260-747-6699. Requests for bow/stern or mooring eye samples or prototypes have a short lead time.